Cricut Maker 4 Review (2027): Is It Still Worth Buying for Party Decor & Small Businesses?
Cricut Maker 4 Review (2027): Is It Still Worth Buying for Party Decor & Small Businesses?
A practical, research-based buying guide for invitation makers, party decorators and creative small businesses.

Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases. Paid links are identified below. We have not personally tested this machine; this review draws on manufacturer documentation and published independent reviews.
Quick verdict: should you buy a Cricut Maker 4?
The Maker 4 is an attractive option for creators who want to produce layered cake toppers, custom labels, vinyl lettering and intricate cardstock decorations without cutting everything by hand. Its broad material and tool compatibility makes it more versatile than a basic paper-only setup. With Maker 5 now available, however, the Maker 4 makes most sense when its actual purchase price or bundle value is significantly better, and when its capabilities meet your needs.
Check Cricut Maker 4 Bundle on Amazon (paid link)
1. Specifications that matter
| Feature | Maker 4 |
|---|---|
| Compatible materials | 300+ according to Cricut; tool and material restrictions apply. |
| Mat sizes | 12 × 12 and 12 × 24 inches; usable cut area is smaller. |
| Smart Materials | Up to 11.7 inches wide and 12 feet long on compatible materials. |
| Tools | 13 compatible tool types; some are sold separately. |
| Maximum material thickness | Up to 2.4 mm for suitable materials and tools, not all materials. |
| Software | Cricut Design Space; compatible device and account required. |
| Print Then Cut | Supported with a compatible separate printer. |
Cricut advertises cutting and writing speeds up to twice those of the previous generation; actual speed depends on the material and project. Read the official Maker 4 quick-start guide for details.
2. What can you make for parties?
Layered cake toppers and cardstock decorations
Cut individual shapes from compatible cardstock, assemble the layers with appropriate adhesive and use food-safe supports where items contact food. The cutting machine handles shapes; it does not assemble or finish the decoration for you.
Personalized signs, cups and favor packaging
Use suitable adhesive vinyl for lettering and compatible iron-on materials for fabric projects. Surface preparation, application temperature and care instructions vary. For food containers, use materials suitable for the intended contact and avoid placing ordinary craft vinyl on food-contact surfaces.
Stickers, labels and printed embellishments
Use Print Then Cut to make shapes around printed graphics. A compatible inkjet printer and printable media are required. Full-size backdrops and large posters generally belong in a professional print workflow, not on this machine.
Explore our cake topper guide and cutting tools guide for more project ideas.
3. Print Then Cut: from digital artwork to finished product
- Prepare artwork with a clean cut outline and correct size. Check your license before using third-party graphics commercially.
- Import compatible artwork into Design Space. A flat JPG or PNG does not automatically contain editable vector cutting paths.
- Choose Print Then Cut, arrange the artwork within the software's current printable area and send it to a compatible printer.
- Place the printed sheet on the correct mat, calibrate when needed and select the documented material setting.
- Make a small test cut, inspect the edges and repeat only after the result is acceptable.
Print Then Cut uses registration marks and has smaller usable dimensions than the nominal sheet or mat size. Reflective or unusual media may require extra testing. The Maker 4 is not a printer: see our home printer guide for complementary printer options.
4. Is the vinyl and iron-on bundle worth it?
The affiliate listing in our catalog is a Maker 4 machine with vinyl and iron-on supplies. Check the live listing for the exact included tools, materials, quantities, seller, return terms and whether the machine is new. A bundle may offer good value if you will actually use the included materials; it is not necessarily cheaper than selecting only the supplies you need.
View the Maker 4 vinyl and iron-on bundle (paid link)
Useful supplies for a party-printable workflow

Neenah Exact Index 110 lb cardstock
Candidate for layered paper projects. Test the material setting and mat grip.
Check on Amazon (paid link)

Fiskars SureCut 12-inch trimmer
Useful for simple straight cuts without setting up the electronic cutter.
Check on Amazon (paid link)
- Glitter cardstock assortment (paid link) — test adhesion and blade settings before batch cutting.
- JOYEZA printable vinyl sticker paper (paid link) — confirm inkjet compatibility and test registration marks and cut depth.
- 230 gsm white cover cardstock (paid link) — useful for structured paper shapes; print and cut tests are recommended.
Check genuine compatible replacement blades, appropriate mats, a weeding tool and transfer tape separately if they are absent from your bundle. An iron-on project requires a suitable heat application method; do not assume a heat press is included.
5. Cricut Maker 4 vs Maker 5: which is better value?
Maker 5 is the newer generation. Cricut's official comparison lists both machines as compatible with over 300 materials and the same family of 13 tools, but the newer machine supports compatible materials up to 3 mm thick and a slightly wider Smart Materials cut area.
| Feature | Maker 4 | Maker 5 |
|---|---|---|
| Maximum supported thickness | 2.4 mm | 3 mm |
| Smart Materials cut width | 11.7 in | 12 in |
| Print Then Cut | Yes | Yes |
| Compatible tools | 13 types | 13 types |
If your typical work is cardstock, labels or vinyl, the previous generation may be sufficient. If the prices are close or you need the expanded material capacity, investigate Maker 5 before buying. Compare the exact bundles and warranty, not only headline discounts.
Other alternatives include the Cricut Explore 4 and EasyPress 3 combo (paid link) and Silhouette Cameo 5 Alpha (paid link). Evaluate their software, supported materials and tools for your workflow.
6. Can it pay for itself in a small business?
Measure contribution margin rather than sales revenue. Suppose a hypothetical machine bundle costs $400 and each completed order contributes $8 after materials, fees and variable labor. At that margin, 50 orders would recover the initial $400 before fixed overhead and taxes. These are illustrative figures, not current Amazon prices or expected earnings.
Budget for replacement mats, blades, wasted material, software subscriptions if chosen, packaging and the time required to assemble each item. A cutting machine can reduce repetitive hand-cutting, but cannot remove every production bottleneck. If you sell downloadable files only, buying equipment may be unnecessary unless you want to prototype products.
7. Pros and cons
Reasons to consider it
- Broad compatibility with craft materials
- Precise repeatable shapes for small projects
- Print Then Cut with separate printer
- Wide range of optional tools
Reasons to skip it
- Newer Maker 5 competes on value
- Design Space dependency and learning curve
- Consumables and optional tools add costs
- Limited width for large signs and banners
Published reviews from TechRadar and Tom's Guide describe the broad crafting capabilities and software-based workflow. Individual results depend on material, setup and experience; we do not assign a hands-on test score.
8. Frequently asked questions
Is Cricut Access required?
Design Space is needed to operate the machine. Cricut Access is an optional paid content subscription; some assets and features may require additional payment. Check the current terms before subscribing.
Can the Maker 4 print images?
No. It cuts, draws or uses compatible tools; printed graphics require a separate printer.
Can I cut a full-size party backdrop?
Not as a single wide panel. Use professional printing and finishing for large backdrop artwork.
Is it beginner-friendly?
It can be, but expect to learn mat selection, calibration, cut settings and Design Space. Start with a simple cardstock project before buying specialty materials.
Can I sell products made with it?
Yes when you have appropriate commercial rights for the artwork, fonts and designs used, and comply with applicable material safety requirements and licensing terms.
Sources and review methodology
- Cricut official Maker 4 specifications
- Cricut Maker 4 vs Maker 5 official comparison
- TechRadar independent review
- Tom's Guide independent review
Research completed in November 2026 for the 2027 buying season. Product prices, software features and availability may change.
Final recommendation
Consider the Maker 4 if the bundle is competitively priced and your regular projects justify the equipment. Compare the newer generation before ordering.
View Cricut Maker 4 Bundle on Amazon (paid link)
Need personalized digital artwork? Explore Digital Moments Rio custom designs.
Comments (0)